DX51D  Galvanized steel sheet has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion.

The material of dx51d galvanized sheet is a non-ferrous alloy composed of zinc as the matrix and adding other elements. The main alloying elements are aluminum, copper, magnesium and so on. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it is divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc-aluminum-copper-magnesium alloy, which has good casting process performance, and the cooling rate has little effect on mechanical properties. It is mostly used in the manufacture of mechanical parts, toys, decorations, household appliances, etc. It has high strength and is easy to form. It can replace some brass or duralumin to make precision forgings.

0.021 (26 ga.) x 22" x 36", G90 Galvanized Steel Sheet

0.021 (26 ga.) x 22" x 48", G90 Galvanized Steel Sheet

0.021 (26 ga.) x 24" x 36", G90 Galvanized Steel Sheet

0.028 (24 ga.) x 12" x 12", G90 Galvanized Steel Sheet

0.028 (24 ga.) x 12" x 24", G90 Galvanized Steel Sheet

0.028 (24 ga.) x 12" x 24", Galvannealed Steel Sheet

0.028 (24 ga.) x 16" x 36", G90 Galvanized Steel Sheet

0.028 (24 ga.) x 16" x 48", G90 Galvanized Steel Sheet

0.028 (24 ga.) x 24" x 24", Galvannealed Steel Sheet

0.052 (18 ga.) x 12" x 12", Galvannealed Steel Sheet

0.052 (18 ga.) x 24" x 48", Galvannealed Steel Sheet

Standards: JIS G3302, ASTM A653M, EN10327, DIN 17162, EN 10142, EN 10147, EN 10292, JIS G3302

Material: DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, S220GD+Z, DX51D+Z/SGCC/A653, etc

Zinc Coating: 40-600g/㎡

Width: 1000mm, 1219mm, 1250mm, 1500mm, or customized as required

Thickness: 0.1-6.5mm or customized as required

Surface Finish: Regular spangle, Big spangle, minimum spangle, zero spangle